• Zmień widok

Active filters

Adjustable lower arm bushes for BMW E46 type UNIBALL-XM

PLN202.85

Adjustable UNIBALL lower arm bushes with brackets matching the BMW E46 chassis.

The lower arm bushes are made entirely in Poland using the most powerful XM uniballs with a Kevlar insert. Unprecedented quality and durability. Brackets made of construction steel, threaded sleeves made of C45 steel. Product zinc galvanized. Uniballs in M20 size (M20x1.5 thread), fit plug&play with our widened lower arms for the BMW E46. In the case of original control arms, the ends of the control arms should be turned or grinded to a diameter of 20 mm.

Price per item. For the car you need 2 pcs.

CLM lock kit for BMW E46 with adapters

PLN1,780.49

This is a cheaper version of our Lock Kit, which is slightly inferior to its older brother, based on custom knuckles. The main difference between our sets is the weight and number of screw connections and the lack of a "no-questions" guarantee.

The CLM steering sets for drifting were designed entirely by COELMOTORSPORT and are manufactured using modern CNC techniques for the BMW E30, E36, E46 and E8x (Series 1) and E9x (Series 3) models. The set was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

CLM lock kit for BMW E30 with adapters

PLN1,780.49

This is a cheaper version of our Lock Kit, which is slightly inferior to its older brother, based on custom knuckles. The main difference between our sets is the weight and number of screw connections and the lack of a "no-questions" guarantee.

The CLM steering sets for drifting were designed entirely by COELMOTORSPORT and are manufactured using modern CNC techniques for the BMW E30, E36, E46 and E8x (Series 1) and E9x (Series 3) models. The set was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

CLM lock kit for BMW E36 with adapters

PLN1,780.49

This is a cheaper version of our Lock Kit, which is slightly inferior to its older brother, based on custom knuckles. The main difference between our sets is the weight and number of screw connections and the lack of a "no-questions" guarantee.

The CLM steering sets for drifting were designed entirely by COELMOTORSPORT and are manufactured using modern CNC techniques for the BMW E30, E36, E46 and E8x (Series 1) and E9x (Series 3) models. The set was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

Breather hose connector for BMW M50 / M50 engine

PLN39.84

The breather hose connector for the BMW M50 / M52 engine, allows the installation of the hose with a larger diameter, and the additional offset of the outlet from the hole axis in the head cover provides no collision with the fuel rail. By default, the connector prepared for a hose with an internal diameter of 16 mm. The connector can be made to any diameter.

Our durable aluminum hose connector ideally replaces the fragile factory plastic element.

Diameter on the lid side: 24 mm

Diameter on the hose side: 16 mm

Total length (end-to-end): 63 mm

Mounting method: push-in (thread adhesive or silicone recommended)

Material: PA6 aluminum

M14x1,5 / AN6 connector for turbo cooling

PLN112.20

M14x1,5 / AN6 connector for turbo cooling. The larger length of the connector guarantees the safety of the cooling hoses (they are far away from the hot turbo part) and the possibility of leading the hoses in any direction.

Turbo thread: M14x1,5

Hose side thread: AN6

Total length (end-to-end): 64 mm

Spanner Size: 22 mm

Gasket: internal diameter min 14 mm / external diameter max 20 mm

(copper or steel-rubber)

Material: aluminium

Quantity: 2 pcs (1 set)

BMW 3.0D M57 gearbox

PLN650.41

Used BMW 3.0D M57 gearbox. It\'s fully functional gearbox from used (moving) cars. We avoid parts from accident cars!

Clutch shaft 28-35 mm / 10 teeth.

The gearbox does not have an output flange (triangle) on the shaft side and a gear lever support bracket. These parts are available separately in our store as well as adapters for M50 / M52 / M54 and LS3 V8 engines.

It is the most powerful manual 5-speed BMW transmission that successfully transfers power of 800-900 HP and torque up to 1200 Nm.

Please check the shipping costs because this gearbox is heavy (43!!).

copy of CLM BMW E8x rear arms

PLN300.81

The CLM control arms for the BMW 1 series E8x and 3 series E9x were designed by COELMOTORSPORT and are manufactured using a CNC methods. The arms were cut with a Fiber laser from 20 mm thick construction steel. The wishbone design of the arms provides low weight and tremendous durability that surpasses BMW standard sheetmetal arms. The length of the arms has been adjusted to allow the correct geometry to be set in a strongly lowered car. The arms enables assembly of factory "floating" sleeves and polyurethane sleeves. The offer applies to the "control arms" without bushings.

We offer swingarms No. 18 and 19 from the diagram. The price is the same for both control arms. Please inform us in the comment on the order.

The price includes a pair of wishbones (right and left).

CLM lock adapters BMW E46

PLN275.61

The CLM lock adapters for the BMW 3 Series were designed by COELMOTORSPORT and are manufactured by a CNC method for BMW E36 and E46 models. The adapter was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

Product designed and manufactured in Poland. The product design belongs exclusively to COELMOTORSPORT. The product is available on the European market under the CLM and DRIFTMAX brands.

Note: The adapters require the use of wider wishbone and eccentric wishbone sleeves or uni-ball mounts.

CLM lock adapters BMW E36

PLN275.61

The CLM lock adapters for the BMW 3 Series were designed by COELMOTORSPORT and are manufactured by a CNC method for BMW E36 and E46 models. The adapter was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

Product designed and manufactured in Poland. The product design belongs exclusively to COELMOTORSPORT. The product is available on the European market under the CLM and DRIFTMAX brands.

Note: The adapters require the use of wider wishbone and eccentric wishbone sleeves or uni-ball mounts.

CLM BMW E81/E87 rear bumper diffuser

PLN1,138.21

The CLM diffuser for BMW E81 / E87 was designed by COELMOTORSPORT and is produced using CNC methods. The diffuser was cut out with a Fiber laser with 3 mm thick aluminum and then bent to its final shape on a CNC edge bender. The diffuser is mounted with three brackets fitted into the rear belt of the 1 series. The installation of the diffuser requires drilling two 10 mm holes in the rear belt. Set of bolts is included.

The diffuser has one ready undercut for the exhaust and another, symmetrical place on the other side cut with a laser and possible to "break" in the case of mounting a double exhaust for the V8 engine. The diffuser is powder-coated in black with a fine texture.

CLM BMW E8x rear arms

PLN300.81

The CLM control arms for the BMW 1 series E8x and 3 series E9x were designed by COELMOTORSPORT and are manufactured using a CNC methods. The arms were cut with a Fiber laser from 20 mm thick construction steel. The wishbone design of the arms provides low weight and tremendous durability that surpasses BMW standard sheetmetal arms. The length of the arms has been adjusted to allow the correct geometry to be set in a strongly lowered car. The arms enables assembly of factory "floating" sleeves and polyurethane sleeves. The offer applies to the "control arms" without bushings.

We offer swingarms No. 18 and 19 from the diagram. The price is the same for both control arms. Please inform us in the comment on the order.

The price includes a pair of wishbones (right and left).