• Zmień widok

Active filters

  • New

Set of universal uniball tie rod ends for CLM kits

PLN283.74

Set of two universal tie rod ends to fit all CLM lock kits. The rod ends are based on very durable XM uniballs.

The tie rod ends correspond to the dimensions of the original ends of the BMW E46 and can be used interchangeably.

Pin made of very durable 40HM steel.

NOTE: PRE-ORDER PRODUCT. DELIVERY AFTER 24/10/2021

Standard end shown in the picture for comparison only.

Set of centering sleeves for coilovers / camber plates

PLN72.36

Set of 4 retaining sleeves for coilovers / camber plates. If necessary, for an additional fee, the sleeves can be made to any size.

Outer diameter 1: 21 mm (larger)

Outer diameter 2: 18 mm (part going into the bearing)

Inner diameter: 12 mm (the part where the shock absorber enters)

Overall height (end-to-end): 13.5 mm

The height of the larger diameter: 5.5 mm

Height of the smaller diameter: 8 mm

Material: aluminum

Quantity: 4 pieces (set)

Lock limiters for CLM adapters

PLN30.00

Lock limiters for CLM adaters are manufactured with the use of CNC method for all lock kits, in particular kits based on CLM lock adapters. The limiters are mounted on the steering rack between the rack and the tie rod with the concave side towards the rack. The lock limiters reduce the maximum steering rack travel and thus the lock angle. The limiters can be successfully used in any car that uses the E36 or E46 steering rack.

Adjustable lower arm bushes for BMW E30 type UNIBALL-XM

PLN486.99

Adjustable UNIBALL lower arm bushes with brackets matching the BMW E30 chassis.

The lower arm bushes are made entirely in Poland using the most powerful XM uniballs with a Kevlar insert. Unprecedented quality and durability. Brackets made of construction steel, threaded sleeves made of C45 steel. Product zinc galvanized. Uniballs in M20 size (M20x1.5 thread), fit plug&play with our widened lower arms for the BMW E46. In the case of original control arms, the ends of the control arms should be turned or grinded to a diameter of 20 mm.

Price per pair. For the car you need 1 pair.

Adjustable lower arm bushes for BMW E36 type UNIBALL-XM

PLN486.99

Adjustable UNIBALL lower arm bushes with brackets matching the BMW E36 chassis.

The lower arm bushes are made entirely in Poland using the most powerful XM uniballs with a Kevlar insert. Unprecedented quality and durability. Brackets made of construction steel, threaded sleeves made of C45 steel. Product zinc galvanized. Uniballs in M20 size (M20x1.5 thread), fit plug&play with our widened lower arms for the BMW E46. In the case of original control arms, the ends of the control arms should be turned or grinded to a diameter of 20 mm.

Price per pair. For the car you need 1 pair.

Adjustable lower arm bushes for BMW E46 type UNIBALL-XM

PLN486.99

Adjustable UNIBALL lower arm bushes with brackets matching the BMW E46 chassis.

The lower arm bushes are made entirely in Poland using the most powerful XM uniballs with a Kevlar insert. Unprecedented quality and durability. Brackets made of construction steel, threaded sleeves made of C45 steel. Product zinc galvanized. Uniballs in M20 size (M20x1.5 thread), fit plug&play with our widened lower arms for the BMW E46. In the case of original control arms, the ends of the control arms should be turned or grinded to a diameter of 20 mm.

Price per pair. For the car you need 1 pair.

CLM lock kit for BMW E46 with adapters

PLN2,186.99

This is a cheaper version of our Lock Kit, which is slightly inferior to its older brother, based on custom knuckles. The main difference between our sets is the weight and number of screw connections and the lack of a "no-questions" guarantee.

The CLM steering sets for drifting were designed entirely by COELMOTORSPORT and are manufactured using modern CNC techniques for the BMW E30, E36, E46 and E8x (Series 1) and E9x (Series 3) models. The set was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

Note: kits for each chassis model differ in dimensions and cannot be used interchangeably. The kit requires a lower arm sleeve with a 20 mm round hole.

CLM lock kit for BMW E30 with adapters

PLN2,186.99

This is a cheaper version of our Lock Kit, which is slightly inferior to its older brother, based on custom knuckles. The main difference between our sets is the weight and number of screw connections and the lack of a "no-questions" guarantee.

The CLM steering sets for drifting were designed entirely by COELMOTORSPORT and are manufactured using modern CNC techniques for the BMW E30, E36, E46 and E8x (Series 1) and E9x (Series 3) models. The set was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

CLM lock kit for BMW E36 with adapters

PLN2,186.99

This is a cheaper version of our Lock Kit, which is slightly inferior to its older brother, based on custom knuckles. The main difference between our sets is the weight and number of screw connections and the lack of a "no-questions" guarantee.

The CLM steering sets for drifting were designed entirely by COELMOTORSPORT and are manufactured using modern CNC techniques for the BMW E30, E36, E46 and E8x (Series 1) and E9x (Series 3) models. The set was designed in a 3D environment and then underwent multiple tests on tracks in Poland, Europe and around the world.

copy of CLM BMW E8x rear arms

PLN398.37

The CLM control arms for the BMW 1 series E8x and 3 series E9x were designed by COELMOTORSPORT and are manufactured using a CNC methods. The arms were cut with a Fiber laser from 20 mm thick construction steel. The wishbone design of the arms provides low weight and tremendous durability that surpasses BMW standard sheetmetal arms. The length of the arms has been adjusted to allow the correct geometry to be set in a strongly lowered car. The arms enables assembly of factory "floating" sleeves and polyurethane sleeves. The offer applies to the "control arms" without bushings.

We offer swingarms No. 18 and 19 from the diagram. The price is the same for both control arms. Please inform us in the comment on the order.

The price includes a pair of wishbones (right and left).