The breather hose connector for the BMW M50 / M52 engine, allows the installation of the hose with a larger diameter, and the additional offset of the outlet from the hole axis in the head cover provides no collision with the fuel rail. By default, the connector prepared for a hose with an internal diameter of 16 mm. The connector can be made to any diameter.

Our durable aluminum hose connector ideally replaces the fragile factory plastic element.

Diameter on the lid side: 24 mm

Fitting on the hose side: AN10

Mounting method: push-in (thread adhesive or silicone recommended), can be also blocked using M5 or M6 bolt (require drilling a hole in the cover)

Material: PA6 aluminum

May require adjustment of fuel rail or using aftermarket fuel rail.

Application: BMW E36 325i M50B25, M3 3.0 S50, 3.2 S52 engine

In the set: Set of M10 studs, washers and 12-point head nuts

Strength up to 220,000 psi

Material: 8740 steel alloy

With these studs you can easily tighten the head with a torque of 120 Nm.