CLM Lock Kit for BMW E36 - RON SCHWARZE

The lock kit is designed for BMW E36. The set is complete and plug & play.

Correct (optimal) CLM suspension settings:

• Camber: -1 degree

• Caster: +4.5 degrees

• Toe-in: optimally 0/0 or 15 minutes per wheel (30 minutes in total) to increase the dynamics of the suspension operation

It should be assumed that a small change in one of the parameters/angles will not have a significant impact on the operation of the set. However, a small change in all parameters/angles may have a significant adverse effect on the operation of the set. Try to set your kit as close as possible to above values.

Each shipment includes detailed assembly instructions. The set is produced in two colors: red and blue, which are sent randomly. The set includes:

• two CLM wishbones with steering limiters and reinforced bolts (Meyle HD)

• two CLM knuckles with a set of grade 10.9 screws and a bearing with a hub (5x120)

• two steering rods (we use rods from several different BMW models depending on the steering kit)

• two rod ends (we use BMW E46 rod ends, it can be replaced with CLM uniball rod ends)

• two CLM relocators

• user manual

Please note that the kits for each car model differ in dimensions and cannot be used interchangeably in other models. The set requires a swing arm bushing with a 20 mm round hole. Such sleeves are available in our shop or from many popular manufacturers of polyurethane elements on the market.

The product design belongs exclusively to COELMOTORSPORT. The product is available on the European market under the CLM and DRIFTMAX brands.